Curtains are decorative window coverings that control interior illumination, protect privacy, and uplift aesthetics. However, you may have experienced light bleed/leaks from your home curtain panels, which can disrupt your sleep, especially for dreamers who are adapted to a pitch-black darkness routine.

To improve your daytime productivity and quality of sleep, we’ve addressed this issue and provided all the possible solutions in today’s piece of informative writing.

The Fundamental Causes of Light Leakage From Curtains

 

Without identifying the cause of light bleed from the top and sides of curtains, one can’t eliminate this problem. Below, we’ve listed and briefly explained the possible reasons for light leakage from curtains.

Improper Curtain Installation

Your curtain installation may not have been completed proficiently, this mostly happens in the case of amateur DIY curtain installations. And that highlights the importance of hiring professionals for adept curtain fixing, and that’s an inexpensive purchase with Curtain in Dubai or similar top-tier curtain suppliers.

Wrong Window Measurements

When you’ve measured the windows yourself and not hired a professional, there’s a greater risk that you may end up getting curtains with shorter width than required. Even when your curtain panels are 1 inch shorter, light leaks will occur.

The Effective Methods To Resolve Light Leakage From The Top of Curtains

We’ve presented the ideas to fix curtain light bleed from the top of the panels. You can fix this problem with whatever solution suits your needs.

1. Put in Place Valance/Pelmet Box

Valances or cornices are installed on the top of curtain panels and, therefore, prevent the leakage of light. The pelmet box can be installed by arranging for a pelmet, brackets, bracket screws, level, measuring tape, pencil, and a drill machine. You can follow the steps explained to get this procedure over with.

• To properly position the pelmet over the curtain headrail, use the tape measure to locate the centre of the pelmet box and mark it with a pencil.
• Drill holes at the designated locations after measuring and marking the wall points for bracket installations.
• After positioning the brackets, fasten them using screws. Use a level balance to make sure the brackets are level.
• After mounting or installing the pelmet into the brackets, the installation is complete.

Valances can mask the unpleasant appearances of curtain tracks and prevent light leaks. On the market, you can find different types of cornices, such as one-step, straight, soft curves, arched, cascade design, soft-dip, inverted-box, etc.

2. Layering The Curtains

You can uplift the aesthetics of your residential and commercial windows by layering your luxury curtains with premium blinds or shades. For this purpose, you need to install blinds or shades in a perfect fit to cover the entire window frame. Blackout Blinds Dubai is a wonderful treatment to layer your window curtains and enjoy the ultimate blackout experience for a sound quality sleep.

It’s a win-win situation that not only fixes your light leakage problem but also enhances the glory and grace of your home and office interiors.

3. Tie The Ends of Curtain Panels To The Rod

Sometimes, everything’s just right about your curtains, such as the installation, window measurements, length of the curtains, etc. The issue of curtain light leakage arises when you open your windows during the daytime with curtains drawn in front of them. The air can cause curtains to sway or shift, leading to minute light leaks. This problem can be fixed if you tie the end of the curtain panels to the curtain rod so that they can stay put even under breeze.

4. Readjust The Curtain Rod Placement

When curtains are installed DIY, it so happens that the curtain rod is not mounted high enough, and that’s why light bleed happens. You’ll have to remove the curtain rod and readjust its location on top of the window frame. Professionals suggest at least 6-8 inches should be the gap between the top of the window frame and curtain rod placement.

5. Apply Foil Sheets on Glass Window Panels

For windows framed with large-sized glass panels, you can cover the top of the glass panel with thin foils of tin to prevent light leakage. These sheets are opaque aluminum sheets that block incoming light. However, one downside to applying tin foil sheets is obstructed outside view.

The Best Procedures To Deal with Light Leakage From Curtain Sides

The following methods are effective at resolving light bleed from the curtain sides.

1. Use Magnetic Strips/Velcro

Magnetic strips and velcro can be easily attached to the sides of the curtains to prevent light leakage. These strips come in various shapes, i.e., circular, square, etc. They will keep the curtain panels in place.

2. DIY A Foam/Cardboard Solution

The cheapest remedy to your problem is to cut foam/cardboard pieces in suitable sizes and attach them to the sides of the window frame behind the curtain. This way, you don’t have to compromise the interior aesthetics yet can resolve your light leakage problem.

3. Use Clips/Tiebacks To Keep Curtains Close To The Wall

Tiebacks or clips can keep your window curtains in place and close to the wall. Thus, the curtains don’t sway and stay attached to the wall, i.e., no light leakage happens because there’s no gap between the curtain and the window frame.

The Endnote!

Although there are numerous potential causes for light leakage from window curtains, you can always choose an appropriate remedy to address the issue. To help you stop light from leaking through the top and sides of the curtains, we’ve included several options in this post.